The Goojodoq GD13 Pro is an iPad stylus with palm rejection, tilt, a shortcut button and magnetic wireless charging. It is the top pen in the GD13 line. This guide explains how it turns on, how it charges and which iPads it works with.
Which iPads Work with the GD13 Pro
The GD13 Pro charges wirelessly on the side of the iPad, so it is made for the iPads with that magnetic charging area:
- iPad Pro 11-inch (1st, 2nd, 3rd and 4th generation)
- iPad Pro 12.9-inch (3rd, 4th, 5th and 6th generation)
- iPad Air (4th and 5th generation)
- iPad mini (6th generation)
It does not support the 2024 iPads (iPad Air M2 and iPad Pro M4). For those, choose the GD14. For the regular iPad (6th to 10th generation), see Which Goojodoq Stylus Fits My iPad?
Turning It on: Quick Mode and Normal Mode
- Quick Mode: the pen powers on as soon as you pick it up, so you can start writing right away.
- Normal Mode: press the power button to turn it on. The light goes off after about ten seconds, but the pen keeps working. After five minutes without use it shuts down to save battery. Press the power button to wake it again.
You don’t need to pair the pen by Bluetooth to write. Bluetooth is used to show the pen’s battery level on the iPad.
The Shortcut Button
The button on the side of the pen gives quick access to three things without leaving what you are doing: the eraser, switching between apps and going back to the home screen. This is handy in note apps, where you can erase without reaching for the toolbar.
Charging
- Attach the pen to the magnetic side of the iPad. It holds in place and charges wirelessly.
- The charge level appears on the iPad, in the battery widget.
- A full charge gives about 8 to 12 hours of writing.
- If you want to charge it away from the iPad, there is a wireless charging case for the GD13 pens.
Palm Rejection and Tilt
You can rest your hand on the screen while writing, and only the pen tip will draw. Tilting the pen changes the line width, which is useful for shading in drawing apps. Like every iPad stylus that isn’t made by Apple, the GD13 Pro has no pressure sensitivity: pressing harder doesn’t make the line thicker.
Tips and Replacements
The GD13 Pro uses a hard-wearing POM tip and also accepts Apple Pencil tips. Spare tips: replacement tips for Apple Pencil. If the tip feels loose, screw it in gently until it is firm.
Quick Fixes
- It doesn’t write: place it on the side of the iPad for a few minutes to charge, then try again. Make sure your iPad is on the list above.
- It stopped mid-session: in Normal Mode it sleeps after five minutes. Press the power button.
- It doesn’t charge on the side: check that a case isn’t covering the magnetic area, and that your iPad is one of the models above.
- An Apple Pencil was used on this iPad: forget it in Settings > Bluetooth, then try the GD13 Pro again.
More fixes in Goojodoq Stylus Not Working on iPad? Comparing models? Read GD13 Pro vs GD14.
